help

[big albee]

right guys I need help,at this time I should be in the pub but I not I,m taking out the master cylinder on my griff and i,m suck how do I get to the bottom nut to undo it pleasehelp. All is ok till I tried to get a spanner to the bottom nut inside the wing,all help will be met with beergot steve bible but I,m still to thick

[Ballistic Banana]

Dont know for sure but dont u get to it by taking the plate off behind the pedals.
Like i said not 100% but worth alook maybe.

BB

[big albee]

Thanks BB off to give it a go

[big albee]

right guys I know I,m thick but took off the master cylinder and no seal, no rubber, no nothing as steve bible has no pictures(see above me being think)are the seals easy to fit and where do I get one,buy the way this is my first tvr and I,ve not touch a engine since 1984 and I,m having great fun

[arthur dent]

hi
to get my seal i took the whole cylinder to a local
motorfactors old seal and all. not hard to replace
a bit tight on the plunger but then it should be.
you have done what i thought was the hardest job in
getting the cylinder out.
good luck i hope it all goes well.

[big albee]

Manage to get a seal kit from lucas comes on monday,just my luck the sun is splitting the trees

>> Edited by big albee on Sunday 23 March 11:32