Windscreen seals
Discussion
The rubber seals round the windscreen have become detached in the top two corners of the windscreen. The main dealer from whom I got my Griff has offered to fix them back for nothing but said that "they all do that" and so I have a feeling they won't spend long trying to get these to stay in place permanently.
Does anyone know of an adhesive/mastic that permanently stops the corners of these seals coming loose?
Thanks.
>>> Edited by prop on Sunday 15th December 16:09
Does anyone know of an adhesive/mastic that permanently stops the corners of these seals coming loose?
Thanks.
>>> Edited by prop on Sunday 15th December 16:09
I have read about someone whose windscreen seal started to lift at high speed driving down a French autoroute. They apparently stopped at a service station and stuck the seal back with "super-glue"...and carried on with no further problems
I would have thought a bit of black silicone sealant would be better. The excess sealant can be neatly wiped off and once cured it has incredible adhesion, ultimately probably a more reliable solution than "super-glue". Also, if you need to get the windscreen out sometime in the future, you may not want the seal "super-glued" in place?
I would have thought a bit of black silicone sealant would be better. The excess sealant can be neatly wiped off and once cured it has incredible adhesion, ultimately probably a more reliable solution than "super-glue". Also, if you need to get the windscreen out sometime in the future, you may not want the seal "super-glued" in place?
Does anyone know of an adhesive/mastic that permanently stops the corners of these seals coming loose?
Thanks.
>>> Edited by prop on Sunday 15th December 16:09
Hi Steve,
Recently had a similar problem, I used Sika-Flex sticks like ST to a blanket, available at Part-co it's not cheap @ £7 tube but it's good stuff. It's also good for sealing leaks! Available in Clear, Black and *Grey (* I think). If you use the black get some of them disposable gloves, unless you don't mind doing Al Jolson hand waves all over Christmas.
Hope this helps
Regards
Big Al.
Thanks for the help. Seems like black Sika-Flex is the stuff to try.
I'll put some gloves on if I remember but my hands have been black on and off for the past 5 years as for that time I have had an MG V8 to tinker with. The Griff is a bit of a change as it is too complex for me to mess with!
I'll put some gloves on if I remember but my hands have been black on and off for the past 5 years as for that time I have had an MG V8 to tinker with. The Griff is a bit of a change as it is too complex for me to mess with!
Well I went in search of way to buy Sikaflex on the web, and I found that there are many different types of Sikaflex.
For example Sikaflex®-292 and Sikaflex®-852 FR, not to mention Sikaflex®-296
More likely are Sikaflex®-221, Sikaflex®-227 or Sikaflex®-252 (See here
Any idea what number Sikaflex you got from part-co?
I've found that Merlin Autosport sell Sikaflex®-221 for £13.95, which seems a tad pricey...
>> Edited by CraigAlsop on Tuesday 17th December 01:39
For example Sikaflex®-292 and Sikaflex®-852 FR, not to mention Sikaflex®-296
More likely are Sikaflex®-221, Sikaflex®-227 or Sikaflex®-252 (See here
Any idea what number Sikaflex you got from part-co?
I've found that Merlin Autosport sell Sikaflex®-221 for £13.95, which seems a tad pricey...
>> Edited by CraigAlsop on Tuesday 17th December 01:39
Gassing Station | Griffith | Top of Page | What's New | My Stuff