ENGINE3 MODIFICATION ON A 10V UR QUATTRO
Discussion
Audi Only in Manchester did a mod to my MB 10V which was to shim out the wastegate and tinker with the injection. It made a big difference to mine with a stronger push and no loss of drivability. I recall the consumption improved a little as well. Dean reckoned that it should give between 20 and 40bhp depending on the car.
I read up on the subject before getting mine done and the consensus from the Quattro Owners Club gurus was dont touch the MB as you can make it worse and the best to be expected is a real 200bhp. Mine wasnt rolling road tested afterwards but I was more than happy with the result.
Yours is preumably a WR car if 87 so is slightly different and I recall more tunable.
Id try the QOC guys (Phil Payne? )as they are a font of knowledge on this subject.
I read up on the subject before getting mine done and the consensus from the Quattro Owners Club gurus was dont touch the MB as you can make it worse and the best to be expected is a real 200bhp. Mine wasnt rolling road tested afterwards but I was more than happy with the result.
Yours is preumably a WR car if 87 so is slightly different and I recall more tunable.
Id try the QOC guys (Phil Payne? )as they are a font of knowledge on this subject.
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff