2005 Polo headlamp electric load levelling wiring
Discussion
I have sourced electric load levelling motors and the controlling rotary switch from a 2005 polo.
I am fitting these to my 1995 Peugeot Boxer (same as Ducato etc.). The reason is that the existing hydraulic load levellers leak and I am sick of fixing them. Also a new set of levellers etc. is a sealed unit and costs ~£250!!
The motors fit like a glove. The rotary switch is mounts fine in the dash.
The thing that is foxing me is the wiring. I cannot work out how to jig the lot together.
There are only three wires on each leveller motor and four wires on the switch but I cannot come up with a combination which works. Nor can I find a satisfactory wiring diagram to consult.
Can anyone help??
Regards
I am fitting these to my 1995 Peugeot Boxer (same as Ducato etc.). The reason is that the existing hydraulic load levellers leak and I am sick of fixing them. Also a new set of levellers etc. is a sealed unit and costs ~£250!!
The motors fit like a glove. The rotary switch is mounts fine in the dash.
The thing that is foxing me is the wiring. I cannot work out how to jig the lot together.
There are only three wires on each leveller motor and four wires on the switch but I cannot come up with a combination which works. Nor can I find a satisfactory wiring diagram to consult.
Can anyone help??
Regards
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff