Newbie Help.
Author
Discussion

Cave1971

Original Poster:

5 posts

100 months

Tuesday 19th June 2018
quotequote all
Hi guys

First post on here.

I had my car detailed around 2 months ago; without going into too much detail I got fleeced.

Anyway I was cleaning my car yesterday and I noticed two parts that look to me like watermarks but they are completely surrounded by scratches in all directions. I have not noticed these before and I am as careful as can be when I clean it, I know I haven't caused them.

Do you think this area can be salvaged? I'll be honest the pictures make it look worse than it is, but still. It is completely smooth to the touch, in any direction, no ridges or raised parts, scratches can't catch fingernail etc.


Cave1971

Original Poster:

5 posts

100 months

Tuesday 19th June 2018
quotequote all
It looks to me like it has been wet sanded and left. However the detailer said he only did one stop chip, which he definitely didn't wet sand as it's still massively raised. I'm gutted

Cave1971

Original Poster:

5 posts

100 months

Tuesday 19th June 2018
quotequote all

IJB1959

2,141 posts

116 months

Tuesday 19th June 2018
quotequote all
Cave1971 said:
Is it on the glass or a panel?

Cave1971

Original Poster:

5 posts

100 months

Tuesday 19th June 2018
quotequote all
It's on the actual bonnet mate

dc2rr07

1,238 posts

261 months

Tuesday 19th June 2018
quotequote all
I would try and T-Cut it then polish.

Cave1971

Original Poster:

5 posts

100 months

Tuesday 19th June 2018
quotequote all
Cheers mate. I've been having all sorts of meltdowns thinking I need to get the whole bonnet resprayed

Dr G

15,986 posts

272 months

Wednesday 20th June 2018
quotequote all
A decent bodyshop will be able to sand that back and re-polish for you as long as there's sufficient paint depth.

shtu

4,596 posts

176 months

Wednesday 20th June 2018
quotequote all
dc2rr07 said:
I would try and T-Cut it then polish.
Meguiars Ultimate Compund. Cheap and cheerful (about £10 a bottle), and should tidy that up with 15 mins of effort.

Looks like a mark that's been touched in then sanded. Edit - nope closer look shows it's a stain of some sort. Some folks say you can remove marks like that by heating the panel with a hot air gun - trust me, it doesn't work. I've had panels at 100c+ to try and remove bird poo marks = not a jot of difference. Compound + 10 minutes = gone.

Just go easy to make sure you don't end up going straight through the lacquer, but if it's that bad it would need painted anyway. So, maybe a bit of compromise needed on how much of the mark you remove.

Edited by shtu on Wednesday 20th June 11:08