SR3 Harness Mounts
Discussion
Our SR3 has the dual mounting for harnesses to make them compatible with Hans devices, ie converging behind the driver. Question is how on earth does one get to the bolts, as they are covered by the centre section bodywork. Is there a trick I am missing?
Any assistance/pointers appreciated
Gary
Any assistance/pointers appreciated
Gary
Hi Gary
Here's a pic of just above the driver's seat on our new SR3 RS; as you'll see various ready to punch and actually formed slots, some of which must be for the Hans, just haven't had the time to work out / ask Radical what goes where! Same provisions relative to the passenger seat. If you want me to take some sort of template and post it to you, let me know.
Just re-read your post and it could be that you already know what I've shown and it's just how the heck to get at them? Give Paul Widnall @ Radical a ring and I'm sure he'll tell you the quickest / easiest way; always found him exceedingly helpful.
Here's a pic of just above the driver's seat on our new SR3 RS; as you'll see various ready to punch and actually formed slots, some of which must be for the Hans, just haven't had the time to work out / ask Radical what goes where! Same provisions relative to the passenger seat. If you want me to take some sort of template and post it to you, let me know.
Just re-read your post and it could be that you already know what I've shown and it's just how the heck to get at them? Give Paul Widnall @ Radical a ring and I'm sure he'll tell you the quickest / easiest way; always found him exceedingly helpful.
Edited by splitpin on Sunday 31st January 23:43
Gassing Station | Radical | Top of Page | What's New | My Stuff