ZZR1200 Oil Drain
Discussion
Hi Nick,
I need to see where the location of the oil drain from the cylinder head (on the driver's side) is located, the casting is very different from the 1100 (it is located on the angled part that sticks out, the 1200 one in this area is not wide enough (in my opinion.
I see three options,
Position 1 is the best location for oil drain during left hand corners but is very restricted for space inside the head if I use the same method as the 1100 i.e with a lock nut inside the head.
Position 2 is possible but I really don't like the idea of the drain right above the exhaust manifold pipe,
position 3 is easy but is not in a good location for draining the oil in left hand corners.
This is why I would really like to see where the Powertec ones go in the ZZR1200s.
Thanks
Martin
I need to see where the location of the oil drain from the cylinder head (on the driver's side) is located, the casting is very different from the 1100 (it is located on the angled part that sticks out, the 1200 one in this area is not wide enough (in my opinion.
I see three options,
Position 1 is the best location for oil drain during left hand corners but is very restricted for space inside the head if I use the same method as the 1100 i.e with a lock nut inside the head.
Position 2 is possible but I really don't like the idea of the drain right above the exhaust manifold pipe,
position 3 is easy but is not in a good location for draining the oil in left hand corners.
This is why I would really like to see where the Powertec ones go in the ZZR1200s.
Thanks
Martin
Gassing Station | Radical | Top of Page | What's New | My Stuff