Rod Ends Clubsport
Discussion
Hi,
The rod ends on the top front wishbone of the Clubsport are 7/16" bore x 1/2" UNF RH male thread.
The steering tie rod (outer ends) rod ends are 3/8" bore x 3/8" UNF LH male threads.
The rear upper and lower wishbones use the same 7/16" bore x 1/2" UNF RH male thread rod ends, however the lower wishbone has a push-in bush reducing the bore from 7/16" to 3/8" ID.
I have sourced suitable rod ends (for K13 JOB's) Clubsport from Rally Design www.rallydesign.co.uk/
I used the "Heavy Race" duty versions
7/16" bore x 1/2" UNF RH male thread - part number HMR7-8T (£18.35 +vat)
3/8" bore x 3/8" UNF LH male threads - part number HML6T (£13.21 +vat)
Hope this helps,
Doug.
The rod ends on the top front wishbone of the Clubsport are 7/16" bore x 1/2" UNF RH male thread.
The steering tie rod (outer ends) rod ends are 3/8" bore x 3/8" UNF LH male threads.
The rear upper and lower wishbones use the same 7/16" bore x 1/2" UNF RH male thread rod ends, however the lower wishbone has a push-in bush reducing the bore from 7/16" to 3/8" ID.
I have sourced suitable rod ends (for K13 JOB's) Clubsport from Rally Design www.rallydesign.co.uk/
I used the "Heavy Race" duty versions
7/16" bore x 1/2" UNF RH male thread - part number HMR7-8T (£18.35 +vat)
3/8" bore x 3/8" UNF LH male threads - part number HML6T (£13.21 +vat)
Hope this helps,
Doug.
Gassing Station | Radical | Top of Page | What's New | My Stuff