Radical MBE cable

[Josh Smith]

Hi,

Before buying new, does anyone have an MBE cable for our PR6 ECU that they are looking to sell?

Also have harnesses and slicks on the sale section if anyone is interested.


Cheers

Josh

[ric355]

There's one here http://www.racecarsdirect.com/listing/53895/mbe_ec...

Not mine.

Depends what ECU version you've got as to whether its the right one or not.

You may have to chop the plug off and put the correct one on to fit the radical loom.

If you need help I did the same thing a few weeks ago.

[AJWSNR]

Understand out of stock in sbd as I rang yesterday.

[AJWSNR]

Understand out of stock in sbd as I rang yesterday.

[Josh Smith]

Waiting for a response from the chap on RCD. We have a 992B which has a large CAN plug on it.

thanks

Josh

[ric355]

I speak in the context of an SR3 but I'd expect looms to be pretty similar. There's normally a 4 pin black sureseal plug coming out of the loom near the main grey ECU plug. It'll have a CAN label on it. You'll need to swap the plug on short cable in the picture on the RCD advert for the correct opposite one. SBD will sell you the right one. I can post more info on the swap if you need it.

Assuming it's a 985 interface it should be the right one (My ECU is a 992b as well). Some early 992s were serial only but I believe the 'b' includes support for the CAN interface.

[Josh Smith]

Cable now sourced from rcd and our ecu plug will fit directly into the can box.

Thanks all.


Josh