Oil pressure sender

[dunc_sx]

Looking for a std clubbie oil pressure sender, anywhere online I can by one at a good price? Alternatively if someone has one lying about?

Cheers,

Dunc

Edit: Should have mentioned, I don't know what thread it is?

Edited by dunc_sx on Sunday 1st July 18:35

[jpivey]

There should be a part number on it somewhere google it. I bought one when I had a C/S from no idea !!! But it was a company that sold parts for light aircraft. Not much help but a start.

[dunc_sx]

Good shout, cheers

[splitpin]

Is it an LP one?; if so, I think I may have one somewhere ........... the only question (and it's a big one with my errrr so called storage system) is where?

[dunc_sx]

Cheers Trev, I'm not too sure what type it is but I'll let you know once I've had a look. Only thing I can remember is the wire connection into it, it's not a standard spade or loop terminal but goes into a small plastic section.

Thanks,

Dunc.

[dunc_sx]

Searching for the part number (603533) brings up a racetech oil pressure sender "only suitable for use with racetech gauge", hope it's the right one that's in there to begin with! 8 bar version btw.

Dunc.

Edited by dunc_sx on Monday 2nd July 22:42

[dunc_sx]

It was looking pretty good there with Rally Design doing them for £17.60 but looks like they don't sell them anymore, a call to another supplier confirmed that they are discontinued. Given that I'm about to change the dash I should be able to chuck a different type of sender in (one that's still used in Radicals though) and be OK. Any ideas? It's a Farringdon wheel that's going in.

Cheers,

Duncan.

[splitpin]

dunc_sx said:

Searching for the part number (603533) brings up a racetech oil pressure sender "only suitable for use with racetech gauge", hope it's the right one that's in there to begin with! 8 bar version btw.

Dunc.

My gosh, found it and golly gosh, that's the Part No on it, prefaced by AST.

If you want it, PM me your address and I'll send it to you for the cost of the postage .......... if it works (and I think it will), buy me a beer next time you come down through Passport Control

[dunc_sx]

Legend email on the way

[splitpin]

All this boundless generosity and you call me a Leg End?

Will this 'merriment' never stop ........... got your email, reply sent, en-route tomorrow.

Cheers

[double d racing]

Leg end ( probabaly LE ) is much too shorter word or words for Trev to use..........why use a few when thouands will do......teeeeeeeee heeeeeeeee

[splitpin]

Is Borrocks short enough?

BTW, there's an S in 1000s

[dunc_sx]

Received, fitted and works fine - thanks Trev

Pies and beers on me

[splitpin]

Super, glad to hear and most welcome.

Trev