Where's Wild Oliver?

[Huntsman]

Oliver,

Did you get my email about a flywheel?

Ta

Ben

[wildoliver]

Back mate, was enjoying the cormayeur snow

[Huntsman]

wildoliver said:

Back mate, was enjoying the cormayeur snow

I've just been enjoying the Mayrhoffen snow and beer.

Turns out I am stuck for this flywheel, I need a MGB flywheel, 5 bearing engine, 3 syncro box, its a 18GB.

Let me know if you can help.

Cheers.

Ben

[wildoliver]

Now then how was it? We had a smashing time.


Re your flywheel possibly, just to try and help you out, are you certain the 3 bearing (3 synchro) flywheel is different to the 5 bearing (3 synch) flywheel, we've just had a conflab and can't remember if there is any difference at all.

Do you have the dimensions, hole pcd's and if there are any pegs. Will help me narrow it down!

[Huntsman]

I believe the 3 bearing 3 syncro flywheel (an MGA one for instance) has a different PCD to the 5 bearing 3 Syncro one from a MGB.

I dont know of any dimensions or any dowels.

Will have a look on MGA Guru.

[Huntsman]

The flywheel in question is from a 64 to 67 MGB.

It will be smaller than a later 18V one.

Must have 3 dowel pins for the clutch cover.

It will have a different bolt pattern to the MGA or 3 bearing 1800 motors, bolt pattern is same as later 18V.

I think! Let me know if you have anything that fits the above description.

Cheers!

[wildoliver]

I'll have a look mate.

[Huntsman]

wildoliver said:

I'll have a look mate.

I found out its part number 12H1474E if that helps.