Rover V8 Injection Type
Discussion
Hi,
Have had a good search around with no luck, ive recently bought a 3.5Efi v8 to rebuild, the engine has come with everything, except ecu and air flow meter. From the engine number (25d) Ive found it’s a 1986 onward engine. Is there a way from this and looking at wiring loom/injection system which Ecu and air flow meter I should buy?
Thanks in advance
Have had a good search around with no luck, ive recently bought a 3.5Efi v8 to rebuild, the engine has come with everything, except ecu and air flow meter. From the engine number (25d) Ive found it’s a 1986 onward engine. Is there a way from this and looking at wiring loom/injection system which Ecu and air flow meter I should buy?
Thanks in advance
Mattlewis59 said:
Hi,
Have had a good search around with no luck, ive recently bought a 3.5Efi v8 to rebuild, the engine has come with everything, except ecu and air flow meter. From the engine number (25d) Ive found it’s a 1986 onward engine. Is there a way from this and looking at wiring loom/injection system which Ecu and air flow meter I should buy?
Thanks in advance
Matt, look here for your precise engine application https://rimmerbros.com/content--name-Rover-V8-Engi...Have had a good search around with no luck, ive recently bought a 3.5Efi v8 to rebuild, the engine has come with everything, except ecu and air flow meter. From the engine number (25d) Ive found it’s a 1986 onward engine. Is there a way from this and looking at wiring loom/injection system which Ecu and air flow meter I should buy?
Thanks in advance
Your engine looks like a R.Rover efi auto 9.35:1cr 25D00001 1986 onwards and because of model year could be either a GEMS or 14CU/CUX ECU engine. The best place to ask for RV8 info' is the v8forum, their collective knowledge knows no bounds...
https://www.v8forum.co.uk/forum/viewforum.php?f=12...
https://www.v8forum.co.uk/forum/viewtopic.php?f=12...
If 14CU/CUX the MAF/AFM will be the Lucas/Hitachi unit. If you'd really like to know the 14CUX ECU here's some bedtime reading http://www.g33.co.uk/pages/technical_fuel_injectio...
Does the plenum have a 9th "cold start" injector fitted? If so this is the early "flapper" type system, parts are becoming hard to find for these, they were quite a crude system and there would be little sense in fitting one to a vehicle from scratch now.
Some photos of what you have would help to identify
Some photos of what you have would help to identify
Gassing Station | MG | Top of Page | What's New | My Stuff