Chimaera owners

[kerniki]

Can someone out there do me a favour, and measure the distance from edge of the outer rim of the wheel too the inner face of the wheel (that mates too the hubb)on the front and the back of a 4.0 Chimp, and post it back, cheers, Nik

[GreenV8S]

quote:Can someone out there do me a favour, and measure the distance from edge of the outer rim of the wheel too the inner face of the wheel (that mates too the hubb)on the front and the back of a 4.0 Chimp, and post it back, cheers, Nik

Measured up some Chimaera 4.0 rims yesterday. Rears are nominally 16x7.5, overall width was 8.5", distance from mounting face to inner edge was 5.5", by my reckoning that means the wheels are inset by 1.25". Fronts are nominally 15x7, overall width 8", distance from mounting face to inner edge was 5", means the wheel is inset by 1".

As far as I know all the other Chimaera and Griffith models use the same wheel sizes.

Hope this helps,
Peter Humphries (and a green V8S)

[kerniki]

Cheers Peter, thats a big help.