Leven or Zetrec Stalks?
Discussion
Fitting the Zertec stalks is very easy, yet a little worrying at first, you need to get your mind around the fact that it is only a plastic stalk that you are cutting off and you will be ok!
OK - so basically undo the screws securing the sterring cowlingthen unclip the indicator switch units, these just clip out. Then with a junior hack-saw cut off the plastic stalk near the base and araldite the new alloy ones onto the remaining stump. Let the glue set then re-fit the rubber gaiters and re-assemble. I´m sure Clive will send you some full instructions if you ask. Rich...
OK - so basically undo the screws securing the sterring cowlingthen unclip the indicator switch units, these just clip out. Then with a junior hack-saw cut off the plastic stalk near the base and araldite the new alloy ones onto the remaining stump. Let the glue set then re-fit the rubber gaiters and re-assemble. I´m sure Clive will send you some full instructions if you ask. Rich...
Gassing Station | Chimaera | Top of Page | What's New | My Stuff