Chimeara 15 inch wheels

[dc400]

I am trying to move 4 15 inch wheels on. I keep getting asked if they are 4x100 how will I find this out.Thanks

[Steve_D]

dc400 said:

I am trying to move 4 15 inch wheels on. I keep getting asked if they are 4x100 how will I find this out.Thanks

4x100 is 4 bolt holes on a 100mm PCD (Pitch Circle Diameter) in the case of 4 holes then you can just measure across the opposite holes.

If the wheels are Chim/Griff wheels then they are likely to be 4X110.

Steve

[_Cosmos_]

I had thought that the pattern was 4x108 but could be wrong?

[Belle427]

Can be found stamped into the wheel too sometimes on the inside.

[sixor8]

Chimaera and Griffs all have Ford hubs, so 4 x 108.

[phillpot]

Which style of wheel, Imola's?

The TVR S series used same Ford hubs ( 4 x 108) and 15" wheels all round.

Edited by phillpot on Sunday 30th June 18:59

[sixor8]

Yes, I've seen several TVR S series with the 15" Imola wheels, they look good on them. It's where most of the left over 15" wheels go from those who have fitted 16" front wheels to replace their 15s.