14cux pin 3 - 5volt supply TPS

[tvr-traffwll]

Hi does anyone know the internal circuitry for pin 3 please. My TPS failed and I have replaced it with an AS5600 Hall effect. It works but it draws too much current causing the volts on pin 3 to drop to 3.6v. My solution will be to disconnect pin 3 from the "TPS" and supply it with its own 5v supply but before I do that I thought I would ask. Does the 14cux have any other 5v outputs?

This is not finished yet.

thank you.

[Belle427]

Seems to suggest you need a stabilised power supply to use one.
https://www.pistonheads.com/gassing/topic.asp?h=0&...