Bubble screens
Discussion
I've got the intermediate one I think. I'm not really sure whether I should be looking through the screen or over it to tell you the truth. I'm currently looking over it. Also, I do think it makes a difference in terms of airflow onto one's helmet, in that I did test drive one without the bubble and I do seem to recall that the wind pressure was far more severe, but then again, that was a long time back. I think the only way to really compare is to test a car fitted with one back-to-back with a car without one.
Hi all,
We have three hights of screens, 4, 5, and 6"
I'm about 6' and the 5" are the best all round. The 4" ones don't give enough deflection and the 6" one start to interfear with the line of sight.
The bubbles aren't a load of money, get a couple and try them. Would post our others off, but not sure how they travel!!!!
Julian
We have three hights of screens, 4, 5, and 6"
I'm about 6' and the 5" are the best all round. The 4" ones don't give enough deflection and the 6" one start to interfear with the line of sight.
The bubbles aren't a load of money, get a couple and try them. Would post our others off, but not sure how they travel!!!!
Julian
Hi Julian,
Do you have any pics of your car with each type on? I've got pics of yours at Rockingham in September - which ones were these?
What height are the "normal" ones that JP has on his? Maybe these ones combined with the seat being slightly lower (with the new floor moulding if I get that fitted) might be an ideal compromise.
At almost £200 per set, they seem pretty pricey to be honest.
Do they require a different plastic base panel to be fitted on?
Cheers, Ross.
Do you have any pics of your car with each type on? I've got pics of yours at Rockingham in September - which ones were these?
What height are the "normal" ones that JP has on his? Maybe these ones combined with the seat being slightly lower (with the new floor moulding if I get that fitted) might be an ideal compromise.
At almost £200 per set, they seem pretty pricey to be honest.
Do they require a different plastic base panel to be fitted on?
Cheers, Ross.
Gassing Station | Ariel | Top of Page | What's New | My Stuff