door switch relay

[10 CYL]

Hi

Is there a relay for each door switch, and if so where are they located.

Thanks

[ViperDave]

I don't think so but i don't have the service manual to hand at the moment to check for sure.

If your door popper isn't working its more than likely a break in the wiring harness between the door and the body. there is a post on the VCA about fixing it if that's your problem.

[Viper]

i checked my service manual, there's no mention of 'door relay' anywhere in the index

hard to beleive youve got this far Carl without a manual

[ViperDave]

here you go, the solution to most electrical problems in the door.

http://forums.viperclub.org/rt-10-gts-discussions/...

[Viper]

wonder if its an AEM thing, rather than a broke wire

[10 CYL]

Thanks for the info everyone
However the wires are intact in both doors, when I press the switch i hear a noise similar to that of a relay noise.
Any other suggestions greatly appreciated.
Thanks

[fatboy18]

From the Door or elseware?

[10 CYL]

The noise appears to be coming from behind the dash somewhere when I press the door switch

[fatboy18]

Ask Baz!

[VENOM500]

I can`t give out that sort of info,sorry.

[MADMAX-UK]

10 CYL said:

Hi

Is there a relay for each door switch, and if so where are they located.

Thanks

On my 96, door latch switches input to the RKE module (Remote Keyless Entry) which is part of the EES (Electronic Entry System) which is in the drivers’ foot-well.

The EES is probably loaded with relays, solid state and/or laddic.

Not sure this solves your problem but at least it answers your first question.

[fatboy18]

Get in contact with Chuck Tator Viper Wizard He should be able to tell you over the phone

[VENOM500]

Wise words Mate!

[fatboy18]

Thankyou master