Help with Fitting Harnesses

[blueunplugged]

Hi hope someone who has fitted or seen a viper with Harnesses fitted can help. I have ordered these today but not sure where to fix them?

I would be grateful of any suggestions or help with this.

Cheers
Mark

[venom500]

Hi Mark,
Yer welcome to pop around and take a look at mine if your ever passing this way.And my harnesses!!

[Viper]

fix 'em so they go over your shoulders, and over your lap



I'm sure someone will repond with a sensible answer, a few have fitted them

[viperdave]

there are a couple of illustrated upgrades on the VCA regarding harnesses.

for example

[blueunplugged]

thank you very much!! will be fitting them on Friday and Saturday along with some nice racing seats.

[viper paul]

Not sure about an RT/10 but the basic tub is the same as the GTS so I gues its similar.

All the holes are pre drilled and threaded behind the seats on the top rail just remover the T section behind the seats and the seats and all should be apparent.

You will need to use new bolts which I assume you have, I don't think you can use eyes for the top. If the eyes or bolts are long enough you can even use the original seat belts mounted on top.

Hardest part for me was cutting the T section for the belts to come through, I glued some rubber tube which I split to cover the edges and joined this at the bottom.

Not a hard job in fact easy.