i need some advice re:bike breakers
Discussion
im collecting a (free) new project on monday,its a ns125f (whoopdee-doo i hear you all cry) that is in pieces.
the bikes parts (bar the frame and engine/box) came from a ns-f that had been stolen from the hayes area in 1990,recovered from cranford park in 1991 and ended up at w.drayton car spares bike area.me and a friend stripped the bike down (as roy couldnt sell the frame)in late '91 and then got hold of a frame from mach 2 motorcycles (88 model frame iirc). the bike (still in pieces) ended up with a friends dad in selsey in mid '92 and that is where it rested until '01 when my mates brother decided that he was going to build the bike as his dad hadnt started it,he bought another frame as the salt had killed the '88 one but only got as far as getting the new frame checked over/stripped back and re-painted and he also managed putting the new indecators he'd bought on before loosing interest.
now,seeing as the bike has been in bits for the last 13+ years,some of the parts are bound to be missing and i know i need to get a new engine/box set-up so what i need to know is......
1.is there a decent strip/rebuild manual for a ns-f
2.does anyone know any good bike breakers in the essex area??
3.will nsr fairing fit the ns-f?
cheers for any help you guys can put forward
>>> Edited by cortinaman on Thursday 12th August 03:56
the bikes parts (bar the frame and engine/box) came from a ns-f that had been stolen from the hayes area in 1990,recovered from cranford park in 1991 and ended up at w.drayton car spares bike area.me and a friend stripped the bike down (as roy couldnt sell the frame)in late '91 and then got hold of a frame from mach 2 motorcycles (88 model frame iirc). the bike (still in pieces) ended up with a friends dad in selsey in mid '92 and that is where it rested until '01 when my mates brother decided that he was going to build the bike as his dad hadnt started it,he bought another frame as the salt had killed the '88 one but only got as far as getting the new frame checked over/stripped back and re-painted and he also managed putting the new indecators he'd bought on before loosing interest.
now,seeing as the bike has been in bits for the last 13+ years,some of the parts are bound to be missing and i know i need to get a new engine/box set-up so what i need to know is......
1.is there a decent strip/rebuild manual for a ns-f
2.does anyone know any good bike breakers in the essex area??
3.will nsr fairing fit the ns-f?
cheers for any help you guys can put forward
>>> Edited by cortinaman on Thursday 12th August 03:56
The only bike breakers yard that I have any real knowledge of is:
www.cheshiremotorcyclesalvage.com/acatalog/catalogbody.html
www.cheshiremotorcyclesalvage.com/acatalog/catalogbody.html
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff