door solenoid on 1998 323i coupe
Discussion
The drivers door lock doesn't open/lock from the remote fob on my 98 323 coupe. Now as the central door locking works on 'all' doors when operated manually with the key, I've been told the 'door solenoid' needs replacing. The part is around £60 from BMW, however has anyone fitted one of these before?
I understand it just plugs in behind the door card..?
Any advice on exactly how to do this, or anything to watch out for would be very helpfull.
Thank you everyone!
James
I understand it just plugs in behind the door card..?
Any advice on exactly how to do this, or anything to watch out for would be very helpfull.
Thank you everyone!
James
It does just literally plug in, it has one connection on it to power it, thats it.
Just make sure the pin on the mechanism arm is located in the white hole on the solenoid before you build the door back up, that pin is what locks/unlocks the mechanism, if its not located properly, the door lock on that side won't work.
Just make sure the pin on the mechanism arm is located in the white hole on the solenoid before you build the door back up, that pin is what locks/unlocks the mechanism, if its not located properly, the door lock on that side won't work.
Gassing Station | BMW General | Top of Page | What's New | My Stuff