BMW E32 750 - How do you reset the service indicator?
Discussion
This is what it looks like on my M3,
It is a socket attached to the bulkhead near the fusebox it is covered with a screw on cap about 2 inch in diameter.
You can clear the service by shorting the service reset pin to ground I believe but please seek further advice before doing so.
>> Edited by r5gttgaz on Monday 29th May 08:48
It is a socket attached to the bulkhead near the fusebox it is covered with a screw on cap about 2 inch in diameter.
You can clear the service by shorting the service reset pin to ground I believe but please seek further advice before doing so.
>> Edited by r5gttgaz on Monday 29th May 08:48
I followed the procedure outlined here: (essentially short pin 7 to ground for 3 or 7 seconds)
www.unofficialbmw.com/e36/electrical/e36_reset_service_lights.html
on my 1993 e36 325 and it worked as described.
Eliot.
>> Edited by eliot on Monday 29th May 09:09
www.unofficialbmw.com/e36/electrical/e36_reset_service_lights.html
on my 1993 e36 325 and it worked as described.
Eliot.
>> Edited by eliot on Monday 29th May 09:09
Gassing Station | BMW General | Top of Page | What's New | My Stuff