Mazda 6 2.0 TS2 diesel injector mounts needed

[digga951]

Hello everyone,

As above, I am looking for 2 of the mounts that hold the injectors down. Currently, when the engine is running, the two left most injectors (when facing the engine) are bouncing up and down by about 3mm. After taking the rocker cover off you can see that the mounts holding the injectors down are bent. Has anyone ever experienced this?

Any idea where I can get a couple of these mounts? Mazda have them on backorder which could take anywhere between 2 weeks or 4 months! Is anyone breaking a car/engine on here?

The car is a 52 reg 2.0 TS2 diesel estate. The part munber of the mount is RF5C13H75, 2 are required. They look a bit like a stubby open ended spanner, with a hole through the centre for securing down.

Any help would be appreciated.

Thanks in advance,

Dan.

[thedave113]

If the injectors are bouncing I would suspect that one of the injector washers below the injectors has failed.
I hasd the same problem with 2 adkjacent injectors bouncing, just changed both washers and now fixed