De-restricting my Scooby?
Discussion
I need a bit of input from the PH collective on this one. If i get the job done remap etc will it show up on the diagnostic when i have my regular services. my concern is blowing the engine and invalidating the waranty. Presently had the PPP engine mods but when i approached prodrive they were very reluctant to give me any sort of sraight answer other than the limiter is there for a reason etc HELP!
Paul
Paul
[quote=DanBoy]De-limiting is just daft and largely pointless.
Maybe you could get it raised a little with the appropriate modifications but de-limiting completely is a no-no.[/quote
No i think you are missing the point i want to be able to go faster than the 155 limit as set by Subaru. I no it sounds very school boy but i am about to go to Germany and use the Auto barns
Paul.
p.s. i am 40 years of age not your average scooby owner but i do like to get a move on
Maybe you could get it raised a little with the appropriate modifications but de-limiting completely is a no-no.[/quote
No i think you are missing the point i want to be able to go faster than the 155 limit as set by Subaru. I no it sounds very school boy but i am about to go to Germany and use the Auto barns
Paul.
p.s. i am 40 years of age not your average scooby owner but i do like to get a move on
LaurenceFrost said:
I don't think it would do it!
Gearing is one thing (my Evo would do over 165 too), but the car is almost certainly aerodynamically limited.
By this I mean the car doesn't have enough power to overcome the wind resistance on the fairly boxy shape at 155mph.
May i beg to differ sugestion is if i have the sensor remapped etc the potential is up to 170/175 but i must admit i think the advice given is sound and having wathched the bonnet lift quite scarely at over 150 allready some 2/3 CM will it stay down?
Scared from ESSEX
Paul
still thinking about it
wot scooby you got year modle so on
think thay are on about your boost
to re-map a scooby with ppp the ppp chip will have to come out
and it will NOT blow up get a re-map so you can run more boost safe and you will get the most out of your mods
a new age scooby my03 on with full de-cat fuel pump can give up to
340bhp 350 torque look on "scoobynet"
had my re-map and i am verry happy
>> Edited by mr p1 on Friday 6th May 21:54
mr p1 said:
wot scooby you got year modle so on
think thay are on about your boost
to re-map a scooby with ppp the ppp chip will have to come out
and it will NOT blow up get a re-map so you can run more boost safe and you will get the most out of your mods
a new age scooby my03 on with full de-cat fuel pump can give up to
340bhp 350 torque look on "scoobynet"
had my re-map and i am verry happy
>> Edited by mr p1 on Friday 6th May 21:54
Hello mate you have got my attention its a 2004 uk model sti with the prodrive engine mods (no adjustable drive power bias) but one of my worries is will this show up when the car is serviced on the diagnostic as i actually lease the car.
Paul
i think it covers the old map(or re-boots ) in the ECU so no one can see the re-map it just looks like you are running a bit more boost "no 2 cars are the same"
go on scoobynet and do a search on bob rawle
then phone bob rawle at br developments
or roger clark motorsport for the info you need only the best will do
<a href="www.brdevelopments.com/">www.brdevelopments.com/</a>
<a href="www.rogerclarkmotorsport.co.uk/general/entrancehome.asp">www.rogerclarkmotorsport.co.uk/general/entrancehome.asp</a>
>> Edited by mr p1 on Sunday 8th May 15:17
>> Edited by mr p1 on Sunday 8th May 15:21
go on scoobynet and do a search on bob rawle
then phone bob rawle at br developments
or roger clark motorsport for the info you need only the best will do
<a href="www.brdevelopments.com/">www.brdevelopments.com/</a>
<a href="www.rogerclarkmotorsport.co.uk/general/entrancehome.asp">www.rogerclarkmotorsport.co.uk/general/entrancehome.asp</a>
>> Edited by mr p1 on Sunday 8th May 15:17
>> Edited by mr p1 on Sunday 8th May 15:21
Gassing Station | Japanese Chat | Top of Page | What's New | My Stuff