Nissan parts supplier - Inconel studs?

[snotrag]

Hi all, after some turbo mounting hardware for my MX5, apparently Nissan used Inconel bolts and studs on a few of there old cars.

I have some part numbers to go from. Not being into Nissans I have no idea - any good parts places in the UK to try other than a Nissan dealer?

[oilslick]

You could try www.amayama.com if Nissan dealers are struggling to find the bits you're looking for.

[snotrag]

Thanks, I was just wondering if there was a Nissan equvialent of somewhere like MX5 parts or suchlike...

I'll try that site, otherwise I will simply try a local Nissan dealer.

[Cyder]

Do you know the Nissan part number? It should be a 10 digit number.

[snotrag]

Yep, got the part number written down at home.

M8x1.25 Inconel studs used to mount turbos on 200SX's and 300ZX's.

They are very, very expensive everywhere except for some reason Nissan used them as OEM fit on these cars so they have them for about a fiver each I'm told.

[FD3Si]

IIRC they are the same as used on the manifold > turbo on FD RX7s. I Think...
Will see what I can dig out. If they are like the M10 ones used for block > manifold, then you'll have the choice of two identical items, one being around 4 quid each, the other being just under 50...

[Red Devil]

http://www.alunox.co.uk/metals.htm
http://www.alunox.co.uk/CATALOGUE%20LARGE.pdf
http://www.alunox.co.uk/contact.htm