Rapide S Grille Restoration Options
Rapide S Grille Restoration Options
Author
Discussion

Yusufyp

Original Poster:

1 posts

74 months

Friday 18th September 2020
quotequote all
Can anyone recommend someone to restore the grille on the Aston Martin Rapide S near to Leicestershire ? Or alternatively guide me on any solution that will remove the marks on the grille ? Images below.

I was hoping one of the smart repairers would do it for me but struggling to find anyone to do it. Thanks in advance





Jon39

14,966 posts

174 months

Friday 18th September 2020
quotequote all

Would either dilute descaler, or a 50:50 mix of white vinegar and water on a paper towel be safe to use?

Are the bright finish grilles made of stainless steel?


LTP

3,139 posts

143 months

Friday 18th September 2020
quotequote all
Jon39 said:

Are the bright finish grilles made of stainless steel?
As far as I know the vanes are aluminium with an anodised or lacquer (or both) finish. I think any caustic or abrasive approach is likely to make the situation worse.

You could polish off the finish and the corrosion but clean, unprotected aluminium oxidised to a matt, white, powdery finish pretty quickly, so the vanes would have to be lacquered as a minimum. If they are lacquered then you’d have to do them all as raw aluminium may look different to the anodised finish. It looks like you'd have to remove and dissemble the grille to treat it successfully.

I could, of course, be wrong - but I’d urge caution.


Edited by LTP on Friday 18th September 08:45

oilit

2,818 posts

209 months

Friday 18th September 2020
quotequote all
I would ask someone like the car cleaner at your local dealer what they do - they must see this every day when they buy in cars - or speak to one of the reputable valet peeps who frequently work with the marque.

JonnyCJ

1,309 posts

85 months

Friday 18th September 2020
quotequote all
Paddy will be along in a minute....

W12GT

4,472 posts

252 months

Friday 18th September 2020
quotequote all
I’d give that a go with a clay bar. Gentle but does the job incredibly well of removing contaminates.

EVR

2,252 posts

91 months

Saturday 19th September 2020
quotequote all
I had the same problem some time ago, albeit a bit less than that.

I used this, perfect.


crispyj

107 posts

198 months

Wednesday 23rd September 2020
quotequote all
I used autoglym resin polish as it has a fine cutting agent. Worked well