Rear Diffuser & Lip Spoiler for DB9

[a98pmalcolm]

Hi guys.

I have searched the hell out of the internet and I'm not having too much luck.

I am waning a small lip spoiler and a beefier (like a DBS) diffuser.

I can't find anything on a diffuser

And with spoilers I can only fine an expensive Carbon one from the states and the KAHN one.

Does anyone know of a place that sells things like this?

[M5MarkM]

It can be done using original DBS parts, BUT it will be very expensive. I'd stay away from tacky brands like Mansory and use just genuine to avoid making the car looking like bot racer trash! Sounds to me like you're trying to do it on a budget, it won't work. The parts are not an exact fit and a lot of work is needed to make them fit plus painting. If I could back in time I probably wouldn't have spent the money to do this

[alan powley]

Nice looking car . Good luck with the updates .

[SS972]

M5MarkM said:

It can be done using original DBS parts, BUT it will be very expensive. I'd stay away from tacky brands like Mansory and use just genuine to avoid making the car looking like bot racer trash! Sounds to me like you're trying to do it on a budget, it won't work. The parts are not an exact fit and a lot of work is needed to make them fit plus painting. If I could back in time I probably wouldn't have spent the money to do this

Planning something similar, did you have to shorten the rear diffuser or only the bumper?

[a98pmalcolm]

Oh I'm not looking at a budget option.

So does the DBS Boot go straight onto an earlier DB9? And the diffuser?

Car looks stunning BTW

[M5MarkM]

a98pmalcolm said:

Oh I'm not looking at a budget option.

So does the DBS Boot go straight onto an earlier DB9? And the diffuser?

Car looks stunning BTW

Sadly not a single panel fits on directly and they all need modifying/cutting. I had all the work done by Trinity who did an excellent job to be fair and finished off with a full re-spray. The defuser was the only part that didn't need modifying BUT it did go onto a DBS bumper which did need modifying!

[SS972]

DBS bonnet fits straight to older DB9, for the boot I have to check if mods a needed,I have one ready to fit.

[GingerMunky]

You can buy these bits direct from the manufacturer OYA Carbon in China.

http://www.oyacarbon.com/list/?274_1.html

Great quality.

[M5MarkM]

SS972 said:

DBS bonnet fits straight to older DB9, for the boot I have to check if mods a needed,I have one ready to fit.

Good point bonnet is a direct swap! Also boot lid should be if it is a coupe, if a Volante then it won't.

OP - have you tried Astonmartinbits.com for the parts? They normally have a very good range/selection at sensible prices

[SS972]

M5MarkM said:

Good point bonnet is a direct swap! Also boot lid should be if it is a coupe, if a Volante then it won't.

Yes it s a coupé

[a98pmalcolm]

GingerMunky said:

You can buy these bits direct from the manufacturer OYA Carbon in China.

http://www.oyacarbon.com/list/?274_1.html

Great quality.

Thanks for that. Had a look, haven't got a clue how to buy or see prices

I have looked at aston martin bits but they aren't too far off RRP if new

[V8 Vantage GT]

These products are high quality, not cheap Chinese made junk. Sacrilege to use Chinese crap.

https://www.vcollection.com/products/DB9_Parts

[M5MarkM]

V8 Vantage GT said:

These products are high quality, not cheap Chinese made junk. Sacrilege to use Chinese crap.

https://www.vcollection.com/products/DB9_Parts

Still works out cheaper to buy original DBS parts in near perfect condition from Astonmartinbits.com

I think it will be a less "chavvy" car with the parts being genuine also

[a98pmalcolm]

But will the Genuine DBS diffuser fit direct onto the DB9 bumper?

[M5MarkM]

a98pmalcolm said:

But will the Genuine DBS diffuser fit direct onto the DB9 bumper?

Nope you need the DBS bumper also, I got mine from astonmartinbits used and they were fine

[a98pmalcolm]

Ok thanks for the reply.

Was your DBS rear bumper a direct fit?

[M5MarkM]

a98pmalcolm said:

Ok thanks for the reply.

Was your DBS rear bumper a direct fit?

Nope, but only a small amount of cutting to make it fit I'm told. Might be worth giving Tim at Trinity a call and asking him to price the labour and what is involved, mention Marks DB9 to DBS he will know everything involved and be able to give you a price for each area you want to do

[a98pmalcolm]

Awesome thanks Mark

[Alex007]

I just ran into this topic as I am looking to upgrade my DB9 Volante rear diffuser to DBS and reading the thread it seems that its not a straight swap but it requires an additional adjustment. Can anybody advise what is the level of an adjustment apart from spraying the diffuser.
Any info is very much appreciated.

[MMarkM]

Alex007 said:

I just ran into this topic as I am looking to upgrade my DB9 Volante rear diffuser to DBS and reading the thread it seems that its not a straight swap but it requires an additional adjustment. Can anybody advise what is the level of an adjustment apart from spraying the diffuser.
Any info is very much appreciated.

Wow old thread! I didnt do the work myself, Trinity did it for me but I understand that parts of the DBS difusser had to be cut away to fit. Sides and bottom I think