colour codes paintwork on tail light
Discussion
It is held on with 2 clips and double sided body tape.
Start at the wider end and lever it off slightly with a plastic trim tool or protected wide blade screw driver.
Work two of them along the top and bottom edge to about 2/3 rds of the way along.
Then use one of them to lever the 2nd clip on the far end of the trim approaching from behind the other end of the trim.
Start at the wider end and lever it off slightly with a plastic trim tool or protected wide blade screw driver.
Work two of them along the top and bottom edge to about 2/3 rds of the way along.
Then use one of them to lever the 2nd clip on the far end of the trim approaching from behind the other end of the trim.
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff