DB7 Vantage front seat removal.
Discussion
Has anyone removed the seats from a DB7V? I can reveal the front fittings if I slide the seats right back on the runners, but it wont push far enough forward to let me at the rear ones. Is there an override on the electrics?
It's a year 2000 V reg, if that matters.
Thanks in advance.
Mark.
It's a year 2000 V reg, if that matters.
Thanks in advance.
Mark.
Mark,
Remove the front bolts first, as you have done, then remove the L shape stops at the front of the runners which are held in place by the front bolts.
You should now be able to move the seat forward enough to remove the rear bolts.
SWITCH OFF the ignition before disconnecting the wiring under the seat, I think it's the black wire that goes to the seatbelt tensioner? Be careful and make sure you get a good connection on refitting to ensure the SRS light stays off.
Steve
Remove the front bolts first, as you have done, then remove the L shape stops at the front of the runners which are held in place by the front bolts.
You should now be able to move the seat forward enough to remove the rear bolts.
SWITCH OFF the ignition before disconnecting the wiring under the seat, I think it's the black wire that goes to the seatbelt tensioner? Be careful and make sure you get a good connection on refitting to ensure the SRS light stays off.
Steve
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff