Removal of rear three quarter protective film
Discussion
I have made arrangements to have a font end wrap down and enquired about removing and renewing the rear parts which are OE, I have stone guards so it is both upper and low parts. The comment I had back was that removal of the factory ones sometimes removes or damages the paint beneath. Anyone had this problem? I don't fancy the risk.
ipd57 said:
I have made arrangements to have a font end wrap down and enquired about removing and renewing the rear parts which are OE, I have stone guards so it is both upper and low parts. The comment I had back was that removal of the factory ones sometimes removes or damages the paint beneath. Anyone had this problem? I don't fancy the risk.
We had ours re-done a couple of years ago.... no damage in spite of being there for 3 years prior.Not guaranteeing yours though!
They are applied before the paint has "fully set" which can take 3-4 weeks.
If you are no careful you will lift the lacquer and possibly the paint.
IME it is OK if you soften it with warm water and then use a hair dryer to keep the line you are peeling away soft.
Do it slowly and carefully!
Wipe away any remaining adhesive gently with white spirit on a clean cloth and wash straight after wards.
Job done!
If you are no careful you will lift the lacquer and possibly the paint.
IME it is OK if you soften it with warm water and then use a hair dryer to keep the line you are peeling away soft.
Do it slowly and carefully!
Wipe away any remaining adhesive gently with white spirit on a clean cloth and wash straight after wards.
Job done!
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff