Discussion
Has anyone taken their 350 in for a geometry setup / laser alignment?
I'm considering having this done at Demon Tweeks (because its 10 mins from home rather than a 150 mile round trip to the dealers that I've been using) - I've had all my other cars done by Tweeks and it makes a vast improvement - they are good and have some experience of Tivs.
Front NS wheel has been kerbed
(hang my head in shame) whilst parking and I am sure it has knocked the geometry out as I am getting a fair degree of 'wander' from the steering.
Any related thoughts / experiences appreciated.
>>> Edited by Nicksey on Tuesday 28th October 10:51
I'm considering having this done at Demon Tweeks (because its 10 mins from home rather than a 150 mile round trip to the dealers that I've been using) - I've had all my other cars done by Tweeks and it makes a vast improvement - they are good and have some experience of Tivs.
Front NS wheel has been kerbed
(hang my head in shame) whilst parking and I am sure it has knocked the geometry out as I am getting a fair degree of 'wander' from the steering. Any related thoughts / experiences appreciated.
>>> Edited by Nicksey on Tuesday 28th October 10:51
Just got back after having the geometry check done and it has made a huge difference.
The factory were good enough to supply the settings and the guys at Tweeks have done another great job - even faced with real difficulties getting the car up on the ramps.
It's improved the stability under engine breaking and on a trailing throttle an unbelievable amount, the return to centre seems much more positive as well.
The caster and camber weren't too bad but toe-in was all over the place.
Think I'll take the long (really long) way home this evening, it's lashing down so that'll spice things up a little.
The factory were good enough to supply the settings and the guys at Tweeks have done another great job - even faced with real difficulties getting the car up on the ramps.
It's improved the stability under engine breaking and on a trailing throttle an unbelievable amount, the return to centre seems much more positive as well.
The caster and camber weren't too bad but toe-in was all over the place.
Think I'll take the long (really long) way home this evening, it's lashing down so that'll spice things up a little.
...not even Jigs can find anything witty in response to this post... 
:musttryhardertothinkofsomethinginterestingsothatidonthavetoanswermyownposts:
Gassing Station | Tamora, T350 & Sagaris | Top of Page | What's New | My Stuff