Crush Washer end of engine fuel Rail

[Buzz 46]

Hi,

Looking for the crush washer at the front end of the fuel rail where large bolt fits . Spoke with motirclan a waste of time no tech knowledge just order takers.Powers Performance not interested. Tried motor factor eBay.

I can’t seem to get the right internal size diameter plenty with the right out side diameter.

Any support appreciated

Pete

[Simon_GH]

Do you have the dimensions? There are companies like this one https://auto.helperformance.com/hel-14mm-m14-x-20m... which may be able to help. A helpful PHer may also have a supply in their garage…

[Buzz 46]

Hi Simon,

Thanks for that, I’ll measure the dimensions and give them a call cheers

Pete

[Simon_GH]

No worries Pete. Worth posting dimensions on here too. TVR owners tend to be, ahem, used to buying / owning spare parts!

[Buzz 46]

Absolutely I have agood few things but never the things I want!

I’ll put the dimensions up at some point of the weekend. Just in the process of fashioning a tool (12mm Hx)to loosen the rear sump pan bolt on the engine.I've managed to get 7 litres out so far I think another 1.5 /2ltr out of the dry sump pan should be possible 🤞🏻

Pete