Act exhaust sag fitting
Discussion
Anyone fitted one? I’ve had one delivered and it’s a night mare fitting the two pipes into the mid rear part! Nothing lines up width wise 4mm out ish! Taken all the brackets apart to give as much movement as possible! I’m now at the point of taking off from the cats but am thinking that could be painful fitting it there as well! Main issue is is I’m low on the ground up on high ramps would be much easier!
I have one and fitted it with no issues, new cats too.
It was tight in places i.e had to be manovered to be routed correctly without fouling anything.
I fitted it all loose first on the hangers etc and tightend up as I went along, the rear pipe section in your picture went on fine, tight but they are. You have to push them on together obviously.
It was tight in places i.e had to be manovered to be routed correctly without fouling anything.
I fitted it all loose first on the hangers etc and tightend up as I went along, the rear pipe section in your picture went on fine, tight but they are. You have to push them on together obviously.
Gassing Station | Tamora, T350 & Sagaris | Top of Page | What's New | My Stuff