Sagaris splitter vanes

[Little Mac]

Can anyone help sourcing replacement rubber trim for the top of the larger of the 3 vanes at the front of the car?
Thought I would try carbon dipping to tidy them up and want to replace the rubber trim that sits on the top edge on each side.

[RAS]

Try Wollies Trim, this looks similar, but you need to check the dimensions: https://www.woolies-trim.co.uk/product/1538/self-a...

[glow worm]

That's the correct stuff , self adhesive . On some Sags it was also put all the way around both the large and small bonnets.. I think it looks better with the gap filled . I bought a massive roll and use it for lots of things .
I also got the ground splitters carbon dipped rather than the matt black paint. Also replaced all the bolts with stainless.
Shame i had to sell it

Edited by glow worm on Thursday 18th March 16:14

[Little Mac]

Cheers guys, will follow this up. I did think about using something like this to fill the central bonnet gap though slightly worried about trapping more heat under the bonnet.
Definitely will be using stainless bolts - already on order. Reason being one (offside) is firmly fixed in the brass bobbin and that’s now spinning - looks like a sod of a job to fix as access is extremely difficult.

[glow worm]

It's easy on a ramp

[crimbo]

That looks amazing