tam t350 front speakers
Discussion
thanks
so i have wiring in the doors, that appears to go nowhere...at least i can't find a connection from the multiplug at the back of the stereo to them with a multimeter. so where do the wires finish???
ant, what did you find when you pulled yours apart?
it looks like ive got to remove the doors to get at the wiring connector, and see where the wires in the door terminate.
did you need to run these back to the stereo, or do they just end somewhere under the dash??
all seems a bit odd to have the door loom but not the loom back to the stereo
so i have wiring in the doors, that appears to go nowhere...at least i can't find a connection from the multiplug at the back of the stereo to them with a multimeter. so where do the wires finish???
ant, what did you find when you pulled yours apart?
it looks like ive got to remove the doors to get at the wiring connector, and see where the wires in the door terminate.
did you need to run these back to the stereo, or do they just end somewhere under the dash??
all seems a bit odd to have the door loom but not the loom back to the stereo
SteveSPG said:
thanks
so i have wiring in the doors, that appears to go nowhere...at least i can't find a connection from the multiplug at the back of the stereo to them with a multimeter. so where do the wires finish???
ant, what did you find when you pulled yours apart?
it looks like ive got to remove the doors to get at the wiring connector, and see where the wires in the door terminate.
did you need to run these back to the stereo, or do they just end somewhere under the dash??
all seems a bit odd to have the door loom but not the loom back to the stereo
Basically Steve, yes , doors off to expose the A post plug and socket, then run wires back to the stereo.so i have wiring in the doors, that appears to go nowhere...at least i can't find a connection from the multiplug at the back of the stereo to them with a multimeter. so where do the wires finish???
ant, what did you find when you pulled yours apart?
it looks like ive got to remove the doors to get at the wiring connector, and see where the wires in the door terminate.
did you need to run these back to the stereo, or do they just end somewhere under the dash??
all seems a bit odd to have the door loom but not the loom back to the stereo
doors come off very easy, not the same way as the Griff...
Ant. said:
Basically Steve, yes , doors off to expose the A post plug and socket, then run wires back to the stereo.
doors come off very easy, not the same way as the Griff...
what a faff... cant believe they scrimped on a plug and a few wires......doors come off very easy, not the same way as the Griff...
can you remove the door without upsetting alignment???
I'm wanting to do this as well. When I put an updated system in my Tam I made provision so that I had enough cable to run to the doors. Can you not just run the cable from the car side(if u see what I mean thro the A pillar (door Mount) then into the door following the cable path for the windows and electric mirrors?
Tbh this is just a bit of a guess I've not had a look at the passage the cable will have to take but it sounds like I'll be taking the doors off. Any one got any pickys showing where the route should run??
I also assume the tweeters piggy back of the 5" round speakers in the bottom of the door? Also the bottom part of the door card isn't flat how have people fitted the speakers flush and did you have leather replaced around that area
Any advice would be great
Cheers
Buzz
Tbh this is just a bit of a guess I've not had a look at the passage the cable will have to take but it sounds like I'll be taking the doors off. Any one got any pickys showing where the route should run??
I also assume the tweeters piggy back of the 5" round speakers in the bottom of the door? Also the bottom part of the door card isn't flat how have people fitted the speakers flush and did you have leather replaced around that area
Any advice would be great
Cheers
Buzz
Buzz it seems there is wiring in the doors to the a puller but not from that back to the radison. Checking the plugs out., the wiring just isn't there. I will pop a door off tomorrow and see which pin connectors are blank
That way you can connect up without pulling the door off the binge to check the wiring. ........ Might try just sticking a meter in the spare holes in the connector in the footwell first and see if I can figure it out that way.
That way you can connect up without pulling the door off the binge to check the wiring. ........ Might try just sticking a meter in the spare holes in the connector in the footwell first and see if I can figure it out that way.
Gassing Station | Tamora, T350 & Sagaris | Top of Page | What's New | My Stuff