The project this weekend...
Discussion
Easy! Get a pair of needle nose pliers, and stick the ends into the two holes drilled in the catchplate on the trailing edge of the door. Twist round to slightly unscrew the round plate, then use a rubber headed hammer to gently knock the plate outwards (towards the door skin). Then tighten it all up, close the door, and hey presto, no more rattling! It works!
nubbin said:
Easy! Get a pair of needle nose pliers, and stick the ends into the two holes drilled in the catchplate on the trailing edge of the door. Twist round to slightly unscrew the round plate, then use a rubber headed hammer to gently knock the plate outwards (towards the door skin). Then tighten it all up, close the door, and hey presto, no more rattling! It works!
Yip!
could you help and sorry to ask a dumb question - but really cannot find the two holes drilled in the catchplate on the trailing edge of the door ?? I have a slight rattle in the passenger door - not really much of an issue.. but thought I would give it a go. If anybody could send me a picture - then even I might be able to figure it out !! Thanks again..
Gassing Station | Tamora, T350 & Sagaris | Top of Page | What's New | My Stuff