first gear clonk???
Discussion
Noticed for the first time today, when setting off slowly in first gear if the revs were just a little on the low side, not quite cutting out, there was what can only be described as a rattle/clonk. If revs were normal then everything ok, but had to try again with revs on the low side to see if the noise came again and it did everytime.
Anyone any ideas or had similar?
cheers
>>> Edited by nickfb1 on Friday 25th June 18:40
Anyone any ideas or had similar?
cheers
>>> Edited by nickfb1 on Friday 25th June 18:40
[quote=blueyes]If it sounds like a load of bolts being shaken in a metal bucket... then yes.
Done 18k miles and it hasn't blown up so it must be o.k.
Thats the noise, ok then seems like nothing to worry about.
Enjoy the blast across france. ps dont forget to leave the speed trap detector at home if you've got one
Done 18k miles and it hasn't blown up so it must be o.k.
Thats the noise, ok then seems like nothing to worry about.
Enjoy the blast across france. ps dont forget to leave the speed trap detector at home if you've got one
Gassing Station | Tamora, T350 & Sagaris | Top of Page | What's New | My Stuff