VXR8 Stereo not coming on
Discussion
snowwolf said:
My R8 Radio would not come on the morning, the screen stayed blank for about 10 minutes and then decided to start working, anyone else had the problem or know what it may be?
Hopefully sounds like it will just be a loose connection at the back, may be take the radio out and just have a check of the wires, a plug may have V8 rumbled it's way loose.I have a set of double din keys (for the Monaro ) we can try on the 15th if you don't get a chance before hand
May as well add to this thread install of start another.
Plugged in an aux cable today and the sound was only coming out of 1 speaker, so I tried the old 'prod the surround' trick, and I now had sound out of both speakers, but it killed the display! Headunit still working, just screen died. A few more random prods and the screen came back on. Hoping a dodgy connection?
If I pull the surround off as described above, does the headunit slide out the front after removing the screws? Are the cables long enough to pull it out, check/clean the connections, and get it back in again?
Plugged in an aux cable today and the sound was only coming out of 1 speaker, so I tried the old 'prod the surround' trick, and I now had sound out of both speakers, but it killed the display! Headunit still working, just screen died. A few more random prods and the screen came back on. Hoping a dodgy connection?
If I pull the surround off as described above, does the headunit slide out the front after removing the screws? Are the cables long enough to pull it out, check/clean the connections, and get it back in again?
No the cables are on either side of the unit ,you need to remove the trim panels to access them, aerial is on the left and main is on the right the unit will not slide out with them in place .Most probable cause is fascia though so i would pull that off first and clean those connectors before trying to get the unit out
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff