Monaro front bumper removal
Discussion
Anyone got any tips on how to get it off?
Ive removed the 2 screws either side, removed the 3 screws from the top grill under the bonnet, and pull the edges out. Disconnected the fog lights.
Should it just pull forward now and off? Its really tight under the headlights, around the main/dipped beam area. Are there more clips around there?
I think the bumper has been off before as the 3 screws under the bonnet were blue locktighted in and i had to drill one of them out.
Thankyou
Ive removed the 2 screws either side, removed the 3 screws from the top grill under the bonnet, and pull the edges out. Disconnected the fog lights.
Should it just pull forward now and off? Its really tight under the headlights, around the main/dipped beam area. Are there more clips around there?
I think the bumper has been off before as the 3 screws under the bonnet were blue locktighted in and i had to drill one of them out.
Thankyou
I think you'll find a few more scrivet type screw clips vertical behind the number plate in the lower grill aperture
diagram in thread below,
http://www.hsv.org.uk/topic.asp?h=27&t=495078&...
diagram in thread below,
http://www.hsv.org.uk/topic.asp?h=27&t=495078&...
This is what i did the other week ...
3 Screws from by wheel arches, 3 screws under bonnet, take off those little plastic clips things that attach to bumper by the wheel arches.
Lay some bubble wrap or a sheet under the car bumper, gentle pull from both sides forward, check by the wheel arches that its moving okay, best with someone to help lift the other side. It will move forward a bit and if you look underneath the lights at the back edge there are some clips, just move the bumper around them you will see what to do.
04 Monaro
3 Screws from by wheel arches, 3 screws under bonnet, take off those little plastic clips things that attach to bumper by the wheel arches.
Lay some bubble wrap or a sheet under the car bumper, gentle pull from both sides forward, check by the wheel arches that its moving okay, best with someone to help lift the other side. It will move forward a bit and if you look underneath the lights at the back edge there are some clips, just move the bumper around them you will see what to do.
04 Monaro
Edited by monaro1982 on Friday 25th March 18:46
As stupid as it sounds im still struggling. This is getting really annoying.
Got the 2 scrivets out and pulled the sides out, what else needs doing?
Also pulled the lower grill off, i just cant see or feel any other clips
Also if anyway is near derby that could help me pull it off that would be great
Thankyou
Got the 2 scrivets out and pulled the sides out, what else needs doing?
Also pulled the lower grill off, i just cant see or feel any other clips
Also if anyway is near derby that could help me pull it off that would be great
Thankyou
I will post up some photos tomorrow to show how free the sides are.
I have removed the two number plate scrivets
So in theory it should pull forward but it wont. Its stuck around the headlights.
Is it easier with 2 people both pulling foward, one either side of the bumper or remove one side of the bumper at a time
I have removed the two number plate scrivets
So in theory it should pull forward but it wont. Its stuck around the headlights.
Is it easier with 2 people both pulling foward, one either side of the bumper or remove one side of the bumper at a time
MadMaxHSV said:
You need to pull the sides out more further forward. Looks like the tabs are still engaged around the front corners of the fender.
Careful though. Breaking the tabs off isn't good news.
Careful though. Breaking the tabs off isn't good news.
^^^
WHS
pull the sides out more to free them, Mine "fell off" I replaced the oil cooler. its not that difficult!
Vulgar LS2 said:
Brut force and ignorance is in order I think.
YHM
Assuming the scrivets are out from under the number plate area. YHM
Edited by Vulgar LS2 on Friday 25th March 21:04
A bit more force may be required! Where the metal joins the plastic bumper under the headlight is a clip where it is now sticking.
When it has been undone once it is a lot easier to remove. You sort of need to slide the bumper with the palm of your hand under the headlight towards the back of the car. At the same time pull outwards from the wheelwell area. A bit of robustness might be needed here!! Be careful of your fingers near the headlight. It is a bit complicated to explain it. Make sure you put something on the ground underneath it beforehand. The clip is similar to the one near the intersection of the bumper,guard and wheelwell, only it is vertical.
motomk
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff