HT Leads Pt No's

[99PBATR]

Evening all. Just a quick one (I did look but so much info) but can anyone give me the Pt No for HT Leads for an LS2 Ro? Are these available only from specialists or on the open market? I seem to be running on 7 cylinders with no engine light so my immediate assumption is a dodgy lead as these engines do chuck out some head plus mine is charged.

All advice welcome...plus Pt No's for plugs and leads please if possible

[fred bloggs]

Personally, I wouldn’t get the oem ones, I’d go for the msd or magnecor ones. If one has gone, some others will fail very soon after. Best to get a quality uprated set

[99PBATR]

Any idea what the part nos are for the uprated sets?

[Lincsls1]

You might be able to get a set from AAS in Newcastle.
They fitted a set to my LS1 sometime ago during some work.
These were the upgraded ones.

[L2VXR]

Google monaro magnecor ls2 and you should come up with a few results like this one

https://www.dcperformance.co.uk/cheap/847016/holde...

Or this one

https://www.ebay.co.uk/itm/Magnecor-KV85-Ignition-...

[99PBATR]

Cheers guys!

[vxr2010]

Have a look at the Rock auto site

[SturdyHSV]

The MSD ones are useful if you have headers as sometimes the primary bends quite close to the boot, so the bendable MSD boots can enforce a bit of an air gap.

Personally, I tried putting those heat proof socks over the leads as with my old AAS headers a couple of leads would crack over time, and the boots just removed and air gap and cooked the lead within a month...

[vxr2010]

I bought the socks via ebay about 12 £ or so , as above leads do suffer with the heat

[dan mugglestone]

Ive just put on some of the ceramic booted ones as had the same problems with being close to the headers
Type "9070c wire set " into ebay and theyll come up