AP break bleeding
Discussion
AP say:
There are either 1 or 2 bleed screws on each caliper. The bleeding procedure must be performed on all bleed
screws that are in the system.
and:
Start from the outboard bleed screw of the caliper furthest away
from the master cylinder. Then the inboard bleed screw (on the same caliper)
There are either 1 or 2 bleed screws on each caliper. The bleeding procedure must be performed on all bleed
screws that are in the system.
and:
Start from the outboard bleed screw of the caliper furthest away
from the master cylinder. Then the inboard bleed screw (on the same caliper)
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff