Identify Coilover make
Discussion
Hi
I know this is a long shot, but can anyone identify the make of these coilovers?
There are no markings other than the silver sticker, which says Pressure Gas
They were fitted to a Monaro if that helps at all.
Also regardless of if they can be identified or not, does anyone have any suggestions of who might be willing to tackle a rebuild of them?
TIA
I know this is a long shot, but can anyone identify the make of these coilovers?
There are no markings other than the silver sticker, which says Pressure Gas
They were fitted to a Monaro if that helps at all.
Also regardless of if they can be identified or not, does anyone have any suggestions of who might be willing to tackle a rebuild of them?
TIA
vxr2010 said:
you can contact cornering force suspension , if one’s blown are others following ? worth a new set of pedders or BC or Tein ? , i have a standard set of pedders xa coilovers on my cv8 which work very well , the pedders xa are 949£
I just wanted to see if they could be rebuilt, they still work fine at the moment (even thought they look a little tired), however they are probably well past the maintenance rebuild scheduled.My current thinking is the Pedder's XA remote canister setup, as a replacement should I need to. I will however contact cornering force suspension to see what they can do.
Bracketry, design, colours don't really look like Pedders though
https://pedders.co.uk/remote-cannister-adj-coilove...
https://pedders.co.uk/remote-cannister-adj-coilove...
stevieturbo said:
Bracketry, design, colours don't really look like Pedders though
https://pedders.co.uk/remote-cannister-adj-coilove...
Sorry the above is a bit confusing, What I meant to say was, if I replace them it would be with a Pedder's XA set.https://pedders.co.uk/remote-cannister-adj-coilove...
In terms of what make they may be, Monkfish some time back suggested AVO however AVO say they are not theirs. So aside from that I have no idea.
Edited by Global-i on Saturday 14th May 10:30
Global-i said:
stevieturbo said:
Bracketry, design, colours don't really look like Pedders though
https://pedders.co.uk/remote-cannister-adj-coilove...
Sorry the above is a bit confusing, What I meant to say was, if I replace them it would be with a Pedder's XA set.https://pedders.co.uk/remote-cannister-adj-coilove...
In terms of what make they may be, Monkfish some time back suggested AVO however AVO say they are not theirs. So aside from that I have no idea.
Edited by Global-i on Saturday 14th May 10:30
Since they've likely for a while I suspect that if they they aren't pedders they would likely be BC racing or Walkinshaw offetings as they did the remote can 2 wsy adjustable coilovers.
Tein only did street application for the Pontiac G8 and us gto - no temote cans. And are green power coated. Which stands up to use.
Pedders xa weren't available early on in uk market as far as i know but did use red paint.
Avo didn't do an off the shelf application so would be very expensive one off so unlikely.
Tein only did street application for the Pontiac G8 and us gto - no temote cans. And are green power coated. Which stands up to use.
Pedders xa weren't available early on in uk market as far as i know but did use red paint.
Avo didn't do an off the shelf application so would be very expensive one off so unlikely.
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff