Repeating myself?
Discussion
I've probably asked this question before ( failing memory etc ) but what type of air con compressor was fitted to a Monaro? Mine is covered in baked on crud and Its difficult to make out.
I'm thinking it's either a GM v5 type or maybe a V7.
I need to know the type of thread it has on the end of the clutch, is it metric or sae ?
I doubt if many have changed a noisy clutch a these but you never know.
John
I'm thinking it's either a GM v5 type or maybe a V7.
I need to know the type of thread it has on the end of the clutch, is it metric or sae ?
I doubt if many have changed a noisy clutch a these but you never know.
John
vxr2010 said:
i rubbed some grease into the fins at the front of it and it did go a lot better after that
I'm not sure if that will work....I tried to lever the clutch disc off with a couple of screw drivers which failed miserably, so I may have made a bad job worse. Typical really!!!!!
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff