Rear lamp cluster clips
Discussion
Had to remove rear n/s lamp cluster for a bulb change, and one of the clips is broken (black one on the left in the photo below). I can't find one doing the usual searches so does anyone know where they can be got from, perhaps Vauxhall standard part? It's held on by an 8mm stud.
Here's the other side of the clip in isolation:
I should add that the cluster still be refitted and held on by the 2 screws but it is slightly loose on the outside and I'd like it to be correct!
Here's the other side of the clip in isolation:
I should add that the cluster still be refitted and held on by the 2 screws but it is slightly loose on the outside and I'd like it to be correct!
Edited by ianwayne on Friday 18th October 14:08
It might be a standard GM part, Vauxhall you will have no luck whatsoever unless you can find a part number at which point you'd be better off with ebay etc. anyway.
From a quick look on RockAuto there's nothing obvious, Walkinshaw may be worth a call to see if they either know what it is or have them around, I don't have access to the workshop manual at the moment but that may at least have a part number somewhere as part of a diagram
I think there were links in the FAQs possibly
From a quick look on RockAuto there's nothing obvious, Walkinshaw may be worth a call to see if they either know what it is or have them around, I don't have access to the workshop manual at the moment but that may at least have a part number somewhere as part of a diagram
I think there were links in the FAQs possibly
Currently at ****, so the computer I am on does not like UK Ebay! 3am here!
https://www.ebay.com.au/itm/92144002-Genuine-Holde...
When I put the part number into UK websites it sells me a Dyson motor!
https://www.ebay.com.au/itm/92144002-Genuine-Holde...
When I put the part number into UK websites it sells me a Dyson motor!
Thanks, it gives me a part number anyway, and it's a GM clip, none I can see on ebay UK.
I see how it works now. The stud screwed into the cluster has a ball on the end which should rotate slightly, but it was a bit corroded. The clip is supposed to stay on the car....
At $14 for one (!), I wonder if they'd put import duty on it. I'll think about it.
I see how it works now. The stud screwed into the cluster has a ball on the end which should rotate slightly, but it was a bit corroded. The clip is supposed to stay on the car....
At $14 for one (!), I wonder if they'd put import duty on it. I'll think about it.
Found these on UK ebay but a bit steep £9.35 each plus £22.58 post https://www.ebay.co.uk/itm/04-06-Pontiac-GTO-Rear-...
I think there should be 2 fitted to each cluster. On mine, one has already been replaced with a sort of plastic guide (grey in the photo).
I was tempted to take the other side off to transfer one clip but there's a chance they'd probably break as well!
A small application of superglue will be tried first.
I was tempted to take the other side off to transfer one clip but there's a chance they'd probably break as well!
A small application of superglue will be tried first.
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff