Gearbox reinstall

[TimMonaroVXR]

I cant remember where the gearbox breather hose fixes to It sticks out quite a way from the main gearbox bolt holes

I am trying to also work out where the gearbox wiring attaches to the gearbox

Could a fellow member assist with these

[TimMonaroVXR]

I worked out the breather tube bracket position although clamped in the wrong place i eventually found it does move to a position where bolt will go through it

[TimMonaroVXR]

Obviously i can push in connectors and work out how they can attach but hope there is a set procedure

But i really cant remember now where the white block and coach screw fit and on other side where the bracket for clutch pipe connects to on the gearbox

For the remote bleed do you make a bracket or drill 10mm hole in existing bracket for the nipple end

[mfp4073]

For the remote bleed pipe I made a small metal bracket and attached it belove the clutch and brake fluid reservoir. I bleed the fluid out everytime it begins to look dirty.

[SturdyHSV]

I'll be under my VXR tomorrow, any pics I could provide that might help?

The box is still bolted to the engine though...

[TimMonaroVXR]

Sturdy thank u Apologies only just got on here again

Yes would

Photos of sides and if can some at top it you can get in there

Cheers