Wanted - Monaro front wing (red)
Discussion
marksx said:
THUNDER STORM said:
I think that you may be able to get that dint out by a good mobile dent repair and then have the wing repainted.
Ade
I'll ask around.Ade
It's a big bugger!
Defo to leave on car is best option, good luck and let us have progress report.
Ade
L2VXR said:
If I could get a second hand wing the right colour I'd just swap it out. Just a few bolts and I seem to remember you know what your doing when you rust proofed it so should only be a mornings work.
Yes it would be easier to do a swap than go the body shop route.Edited by L2VXR on Saturday 23 December 22:27
I need to take the front bumper off anyway to fit mesh and align properly, so I could kill two birds with one stone.
Rust proofing. Ugh. Not doing that again myself! Someone can do this one for me
Yanayaya said:
You should still be able to get these from Vauxhall. I know it's not the cheapest option but it's worth a look for a direct replacement.
I replaced mine on the 4th July this year, the cost was around £200 for the wing, unprimed. Part number if you need it is: 92122726
I still think it is more cost effective to remove dint and respray, as the above is still to spray.I replaced mine on the 4th July this year, the cost was around £200 for the wing, unprimed. Part number if you need it is: 92122726
Ade
Yanayaya said:
You should still be able to get these from Vauxhall. I know it's not the cheapest option but it's worth a look for a direct replacement.
I replaced mine on the 4th July this year, the cost was around £200 for the wing, unprimed. Part number if you need it is: 92122726
That's useful to know, thank you!I replaced mine on the 4th July this year, the cost was around £200 for the wing, unprimed. Part number if you need it is: 92122726
Raving and speed4u are maybes at the minute. Arnie no longer has a body shell.
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff