monaro rear bushes
Discussion
Hi All. Need a bit of advice. Looking to replace bushes at the rear with pedders poly bushes. The fish replaced my sway bar bushes last year but I want to get the others replaced and am looking to replace the subframe front bushes along with the control arm bush kit.
My question is I presume the alignment tool will be required for this job therefore out of my scope, and are there any other bushes on the rear which I have missed? Finally could anyone recommend someone who could carry out this task?
My question is I presume the alignment tool will be required for this job therefore out of my scope, and are there any other bushes on the rear which I have missed? Finally could anyone recommend someone who could carry out this task?
When I looked at doing my rear arms with Poly inner and outer, I did a bit of googling and some vendors don’t recommend changing the inner one for poly because the way the suspension works. Please review the LS1GTO threads for more info.
In the end I went with what Monkfish recommended. Pedders 5803 outer bush and new OEM inners. I already had the poly cross member bushes.
Unfortunately I can’t tell you what the drive is like because it is still in bits.
http://www.pedders.com.au/sites/default/files/docs...
These old thread go into a lot of detail on the issues.
http://www.ls1gto.com/forums/archive/index.php/t-2...
http://www.ls1gto.com/forums/archive/index.php/t-3...
In the end I went with what Monkfish recommended. Pedders 5803 outer bush and new OEM inners. I already had the poly cross member bushes.
Unfortunately I can’t tell you what the drive is like because it is still in bits.
http://www.pedders.com.au/sites/default/files/docs...
These old thread go into a lot of detail on the issues.
http://www.ls1gto.com/forums/archive/index.php/t-2...
http://www.ls1gto.com/forums/archive/index.php/t-3...
Edited by Global-i on Thursday 9th November 22:58
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff