Monaro VXR 6.0 Air Conditioning Leak
Discussion
You'll probably need to take it to someone with a big tank of Nitrogen with dye in it, they'll over pressure it all and the leak will then hopefully become obvious. Mine got holed on the rad clamp too.
This is my fix, using a splice and a 90 degree section taken from a Volvo in a scrap yard.
The large gold coloured sections are 'Splice Lok' - found online and available in all usual pipe sizes. This was considerably cheaper that having to replace the entire low pressure section, requiring only axle stands and the removal of the rad fans. ( note rag in upper rad pipe so didn't get too dripped on whilst doing this.
Hope this is a help.
This is my fix, using a splice and a 90 degree section taken from a Volvo in a scrap yard.
The large gold coloured sections are 'Splice Lok' - found online and available in all usual pipe sizes. This was considerably cheaper that having to replace the entire low pressure section, requiring only axle stands and the removal of the rad fans. ( note rag in upper rad pipe so didn't get too dripped on whilst doing this.
Hope this is a help.
Mine has leak marking from around where the compressor bolts to the block
http://www.ebay.co.uk/itm/A-C-Compressor-ACDelco-G...
http://www.ebay.co.uk/itm/A-C-Compressor-ACDelco-G...
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff