Indicater flashing too fast
Discussion
vxr2010 said:
i can't add the link but a search goes to a vrx site via hsv and it explains what to do
Maybe this thread:http://www.pistonheads.com/gassing/topic.asp?h=27&...
Its usually a cold/damp thing mine were very intermittent. I lost patience in the end and replaced all the LEDs in both units for the indicators and touch wood haven't had the problem since. Considering replacement units are in the region of £500-800 if the loom fix doesn't work for you its well worth DIYing the LEDs if you can.
mattcov said:
posted about this a few weeks ago. I've had a new light unit and it is now (still) flashing. I cant get hold of any of the looms and Picador aren't getting any more. I'm going to have a look at the LED control unit next...
When I was having problems Walkinshaw had the required bits but if it still does it with a new unit I would guess you have some other problem.In terms of wiring both rear lights are the same so if you unscrew them from the car you can swap them over on the wiring and see if the fault follows the light unit or stays on the same side.
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff