Arse! Anyone lend me a cylinder head coolant plug?

[Mud_]

Sold the old heads and assume the coolant blanking plug (for the side with no temp sensor) was still in them...can anyone lend me one? I'll send a new one your way when I work out where to get them!

[Behold81]

I will have one in my spare heads. Send me your details. I'll post it for Friday to you.

[stevieturbo]

Almost sure it's standard M12 thread...ie a bolt.

[Mud_]

Behold81 said:

I will have one in my spare heads. Send me your details. I'll post it for Friday to you.

That'd be great, many thanks

stevieturbo said:

Almost sure it's
standard M12 thread...ie a bolt.

Think you're right, just struggling to find one to hand and at this point want it 'right'... Hasn't it got a silly little head to clear the exhaust flange?

[Behold81]

yeah it's flat with an Allen head. Then just locktite or Ptfe to seal.

[Behold81]

I have mailed kmud but it looks like I do not have one or my old coolant sensor.

so anyone?

[snowwolf]

Once you have used this you will never go back to the Plastc Tape For Engineers (PTFE)
http://www.loctite.co.uk/loctite-4087.htm?nodeid=8...

Behold81 said:

yeah it's flat with an Allen head. Then just locktite or Ptfe to seal.

[Mud_]

snowwolf said:

Once you have used this you will never go back to the Plastc Tape For Engineers (PTFE)
http://www.loctite.co.uk/loctite-4087.htm?nodeid=8...

Behold81 said:

yeah it's flat with an Allen head. Then just locktite or Ptfe to seal.

I've been using permatex stuff, but use the loctite sealant at work.